4
Rev. 1/23
GB55B S/N: 1014 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
2.50 lbs.
(1.13 kg)
Air pressure req'd
-
90 psi
-
100 psi (6.2 bar
-
6.9 bar)
Air consumption
-
.29 SCF/cycle (8.21 L/cycle)
Setting stroke
-
.740" (18.8mm)
Noise level
-
81.5 dB(A)
Rated pull load
-
1,000 lbs. (4.457kN)
Vibration
-
Tested –
No hazards found.
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB55B can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
The GB55B pneumatic installation tool is designed specifically for the most efficient installation of blind fasteners. The GB55B incorporates a
collection bottle system to collect spent pintails into a bottle eliminating FOD. It will install aluminum fasteners through 3/16" diameter,
and through 1/8" diameter fasteners in any material. It weighs only 2.50 lbs. (1.13 kg) and can be operated in any position.
The GB55B Installation tool is 8.36" (212.4 mm) high, has a
.740” (18.8
mm) stroke and generates a minimum of 1,000 lbs. (4.45 kN) of
pull at 90 psi. (6.2 bar). It operates on 90
-
100 psi (6.2
-
6.9 bar) of air pressure, the GB55B does not exceed 81.5 dB(A) and consumes
.29 SCF/cycle (8.21 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE PURCHASED SEPARATELY. (See nose assembly selection
chart on pg. 14).
