![background image](http://html.mh-extra.com/html/gage-bilt/gb54b/gb54b_original-instructions-manual_555850014.webp)
GB54B S/N: 1088 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
14
Rev. 10/22
FASTENER
DIA.
STRAIGHT
3/32
3C-54-43
1/8
4C-54-43
3/32
3A-54-43
1/8
4A-54-43
3/32
3N-54-43
1/8
1
4N-54-43
3/32
3N-54-43
1/8
4CEA-54-43
3/32
3N-54-43
1/8
4CES-54-43
3/32
3C-54-43
1/8
4C-54-43
1/8
3A-54-43
5/32
4A-54-43
1) ALUMINUM & STEEL ONLY.
GAGE BILT CERTIFIES THE GB54B WILL INSTALL THE ABOVE FASTENERS
FASTACK®
AF5055
AF5055
SUPERTACK®
AF5075
AF5076
S149A020
*ALL COUNTERSUNK 'C' NOSE ASSEMBLIES MAY BE USED TO INSTALL BOTH UNIVERSAL & COUNTERSUNK HEAD RIVETS
NUT PLATE RIVETS
MS20600 SERIES
CCR244/264/274
MS/9SP/PT
BACR15CC/CF/DA/DR
NAS1398A/1399A
NAS1738A/1739A
RV1000/1100 & 1200
1/8
SMLS04-54-43
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH
THE NOSE ASSY EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES
CLOSED END
NAIL RIVET
(ALUMINUM MANDREL)
CLOSED END
NAIL RIVET
(STEEL MANDREL)
OPEN END
NAIL RIVET
FASTACK® AND SUPERTACK® ARE REGISTERED TRADEM ARKS OF ALLFAST FASTENING SYSTEM S
INC.
BLIND RIVET (SINGLE ACTION)
WITH OR W/OUT DRIVE WASHER
NAS1900 S & U SERIES
Rev. 9/18
GB54B NOSE ASSEMBLY SELECTION CHART
Gage Bilt also supplies pin & collar swage
inspection gages to certify swage
installation.
(Sold Separately)
STRAIGHT
(Sold Separately)
Grip Gage #GB105093
For NAS LOCKBOLTS and blind fasteners
(Sold Separately)
Catcher Bag
-
Stem
(715610)
Effective FOD Control
Use with
XX
-
54
-
43
straight nose assemblies.
(Sold Separately)
Image may not reflect actual tool
GB54B ACCESSORIES
Approved for use on Gage Bilt CE installation tools and/or other manufacturer
’
s CE approved tools of similar design.
(Sold Separately)