Gage Bilt GB50, Original Instructions Manual

Page: 8 / 9

8
Rev. 5/15
GB50 S/N: 1476 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
GB50 - SELECTION CHART
GAGE BILT ALSO SUPPLIES PIN & COLLAR SWAGE INSPECTION
GAGES TO CERTIFY CORRECT SWAGE INSTALLATION.
FASTENER DIA. STRAIGHT RIGHT ANGLE
1
OFFSET
3/32 3A-715B-43 3A-715-54RA 3A-715-40OS
1/8 4A-715B-43 4A-715-54RA 4A-715-40OS
5/32
2
5A-715B-43 5A-715-54RA 5A-715-40OS
1/8 SMLS04-715B-43 SMLS04-715-54RA SMLS04-715A-40OS
5/32
2
SMLS05-715B-43 SMLS05-715-54RA SMLS05-715A-40OS
1/8 456MAX-715-43 456MAX-715B-54RA 456MAX-715A-40OS
1/8 MBC04-715C-43
5/32 MBC05-715C-43
3/16 MBC06-715C-43
3/32 3N-715E-43 3N-715-54RA 3N-715-40OS
1/8
3
4N-715E-43 4N-715-54RA 4N-715-40OS
5/32
2
5N-715E-43 5N-715-54RA 5N-715-40OS
3/32 3N-715E-43 3N-715-54RA 3N-715-40OS
1/8
3
4CEA-715E-43 4CEA-715-54RA 4CEA-715-40OS
5/32
2
5CEA-715E-43 5CEA-715-54RA 5CEA-715-40OS
3/32 3N-715E-43 3N-715-54RA 3N-715-40OS
1/8
3
4CES-715E-43 4CES-715-54RA 4CES-715-40OS
5/32
2
5CES-715E-43 5CES-715-54RA 5CES-715-40OS
3/32 3C-715B-43 3C-715-54RA 3C-715-40OS
1/8 4C-715B-43 4C-715-54RA 4C-715-40OS
5/32 5C-715B-43 5C-715-54RA 5C-715-40OS
1/8 3A-715B-43 3A-715-54RA 3A-715-40OS
5/32 4A-715B-43 4A-715-54RA 4A-715-40OS
1) RIGHT ANGLE NOSE ASSEMBLYS MAY REQUIRE MORE THAN ONE PULL.
2) ALUMINUM ONLY.
3) ALUMINUM & STEEL ONLY.
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE
EXTENDS FROM THE TOOL I.E. -20 = 2.0 INCHES
6/15
CLOSED END
NAIL RIVET
(ALUMINUM MANDREL)
CLOSED END
NAIL RIVET
(STEEL MANDREL)
OPEN END
NAIL RIVET
CHERRYM AX® AND M BC® ARE REGISTERED TRADEM ARKS OF CHERRY AEROSPACE. FASTACK® AND SUPERTACK® ARE REGISTERED TRADEM ARKS OF
ALLFAST FASTENING SYSTEM S INC.
BLIND RIVET (SINGLE ACTION)
WITH OR W/OUT DRIVE
WASHER
NAS1900 S & U SERIES
GAGE BILT CERTIFIES THE GB50 WILL INSTALL THE ABOVE FASTENERS
CHERRYMAX®,
CHERRYMAX® 'AB',
MBC® LOCK CREATOR
BACR15FR/FP, BACR15GF/GK,
NAS1900 S & U SERIES BLIND
RIVET WITH DRIVE WASHER
MBC
®
NAS1715-1721
FASTACK®
AF5055
SUPERTACK®
AF5075
AF5076
S149A020
NUT PLATE RIVETS
MS20600 SERIES
CCR244/264/274
MS/9SP/PT
BACR15CC/CF/DA/DR
"A" CODE
NAS1398A, NAS1399A
NAS1738A, NAS1739A
1/8 4C-715B-43 4C-715-54RA
5C-715-54RA 5/32
2
5C-715-40OS
4C-715-40OS
3/32 3C-715-54RA 3C-715-40OS
5C-715B-43
3C-715B-43