GAELCO Tuning Race, User Manual

Page: 36 / 73

GAELCO - TUNING RACE
36
•
Before commencing work on the machine, maintenance staff must read this manual
carefully and check that all of the safety norms concerning the installation and use of
the TUNING RACE machine. Maintenance staff must advise the operator of any
irregularities they observe so that the latter can take the appropriate measures to put
matters right.
•
The machine must be disconnected from the power supply before beginning any kind
of maintenance work (changing parts, repairs, etc.), except where this is confined to a
simple check on whether the machine is working properly. Hold the plug when
unplugging the machine - DO NOT PULL ON THE CABLE !
•
Parts of the power supply unit (PSU) and the monitor remain hot or store high voltage
even when the machine has been unplugged. Do not touch these parts as electric
shock or burns may result.
•
Make sure there is plenty of room for maintenance to be carried out. At least 3 metres
should be left free between the machine itself and other objects (e.g. adjacent
machines, walls, etc.).
•
When parts needs replacing, use only those approved by Gaelco S.A. and which meet
the relevant specifications.
Technical service and maintenance must be carried out by qualified staff.
No modifications shall be made to the machine unless these have been approved by the
manufacturer in writing. Failure to observe this requirement may cause damage or
accidents and will automatically render the guarantee null and void.
If any task needs to be performed which is not described in this manual, please contact the
distributor for instructions. The manufacturer declines any liability for damage and injury
arising from failure to comply with this requirement
Do not attempt to repair the CPU. It contains sensitive chips that could easily damaged by
even the small internal voltage of a meter. Always return the CPU to your distributor for any
repairs.
9.2 SAFETY PRECAUTIONS
9.1 PRIOR CONSIDERATIONS
9. TECHNICAL SERVICE