GAELCO Tuning Race, User Manual

Page: 10 / 73

GAELCO - TUNING RACE
10
3.2 SAFETY PRECAUTIONS CONCERNING LOCATION
Do not place the machine where it might be an obstacle in case on emergency (i.e.
close to fire extinguishers or emergency exits).
Install and operate the machine in places where appropriate lighting is available, so
warning labels can be clearly read by the customers.
This machine has been for indoor use only, within residential or commercial
spaces. Absolutely do not set up the machine outdoors or under the following
conditions:
•
Direct exposure to sunlight, high humidity, water contact, dust, high heat or extreme
cold.
•
In locations near containers holding liquids or liquid dispensing equipment. In general,
precautions should be taken against spilling liquids of any kind whatsoever over the
machine
•
In a place exposed to vibration. The machine must be installed on a level surface with
levellers properly adjusted.
•
In locations near ventilating holes. Doing so could cause internal temperature to rise
excessively, resulting in equipment failure.
•
Near hazardous substances
Furthermore:
•
In order to have easy access to the PSU, CPU and control devices, please make sure
that the rear an sides of the machine are separated from the wall or other machines by
at least 300mm (12")
•
Ventilation slots must be not obstructed, and the machine must be positioned so as to
leave a distance of at least 100mm (4") from possible obstructions
•
Do not run the power cord across passages where pedestrian's feet could get caught
on the cord.
•
Ensure that the location’s power supply is equipped with an Earth Leakage Breaker
rated at 30mA.
GAELCO shall not be held responsible for any damage resulting from the failure to
observe these instructions.