GAELCO Tuning Race, User Manual, Page: 27 / 73

GAELCO - TUNING RACE
27
6.7 LINK SETTINGS
TUNING RACE allows you to connect up to four machines, so several players can
compete head to head. The connection is detected automatically, when the link cable is
plugged. When just
TWO machines are linked, proceed as follows:
1. Switch off the machines.
2. Take one crossover link cable (supplied with each machine) and plug it on the RJ45/8
connectors, placed on the rear bottom of the monitor cabinets.
3. Switch on the machines.
4. Enter
Link menu and select Link mode on both machines.
5. Select. Player 1 for the machine paleced on the left side, Player 2 for the machine
placed on the right side.
When MORE THAN TWO machines have to be linked, it is necessary a network switch
working at 100Mbps . In that case all machines sould be pugged to the network switch.
Proceed as follows:
1. Switch off the machines.
2. Take as many cables as machines. If you can’t find a network switch with automatic
polarity detection, the link cable supplied by Gaelco is not suitable, as it is a crossover
Ethernet cable. In that case you have to use normal patch cable.
3. For each machine, plug one end of the link cable to the RJ45/8 connector. The other end
is plugged to the network switch.
4. Switch on the network switch, then switch on the machines.
5. On each machine, select the
Link mode option. Assign a number to each machine,
beginning from left: Player 1 for the top left machine, Player 2 for the next to the right,
Player 3 for the next and so on. This facilitates the identification of each player during
the game.
The Test option allows you to know the communication status of one machine with the
other linked machines. When linked, all machines must run the same software.
LINK
------------------------------------------------------------
Link mode: Player 2
Test
On line: YES
Base IP mode: DYNAMIC
Remote IP: www.gaelco.es
Base IP: 090.000.000.232
Netmask: 255.255.255.000
Gateway/ Proxy: 090.000.000.001
Location:
Group:
Country: SPAIN
Test
Exit