11
MANUAL OVERRIDE
Increase temperature set point
In manual mode, the heater will maintain the temperature set point and will
ignore the pre-set program. SSH will maintain the selected temperature for the
24 hours of the day. Use this mode, when the same temperature is desired for
every hour in the week.
To modify the temperature set point, press
or
until the desired
temperature is shown.
STANDBY MODE
It is possible to put SSH in standby mode where the heater does not maintain
any set temperature or run any programs. It keeps the time settings configured
previously. When in this mode, the heater will display the current time and the
icon
.
KEYBOARD LOCK
Lock / Unlock
During any operation mode, it is possible to lock the keyboard by holding
and
simultaneously for 3 seconds. When the keyboard is locked, the
message
Lock
will be displayed.
When the keyboard is locked, if any button is pressed, the display will show
“
Lock
” and the unit will not respond.
To unlock the keyboard, press
and
simultaneously for 3 seconds.
GENERAL SETTINGS
It is possible to modify the general setting. During any operation mode, press &
release
, the display shows the flashing temperature symbol
and the RF
symbol
.
Hold
for 5 seconds until the display shows UP01.
