11
-
Clean and lubricate the clipper regularly to ensure
better performance and longer life.
-
Do not wrap the power cord around the unit during use.
-
If the adaptor breaks or gets lost, contact an authorized
service center for replacement.
Pay attention to the features of the adaptor, if you
decide to change it. An incorrect voltage may damage
the motor and jeopardize the functionality of the
device. Appliance contains non-replaceable batteries.
DESCRIPTION G30043
1.
Blade
2.
Comb
3.
Cutting regulator
4.
On/off button
5.
Charging light
6.
Charging input
7.
2 combs set
8.
Shissors
9.
Small brush
10.
Lubricating oil
11.
Adaptor
12.
Connection
pin
OPERATING
The hair clipper can be recharged using the adaptor and it can be used both weather it is connected to the
adaptor or not.
WARNING
: if during battery working the appliance stop working, put switch (4) in OFF position, connect
adaptor (11) to power supply and pin (12) to connector (6). Wait one minute before starting again operation.
HOW TO USE
-
Keeping off the unit, mount one of the supplied combs (7). Choose the attachment depending on the length
you wish to obtain (7a – from 1 to 10 mm, 7b – from 11 to 20 mm).
-
Set the cutting height using the regulator (3).
-
Turn on the clipper and start cutting. Once finished cutting operation, turn off the device using the power
button (4) and store the clipper and its accessories out of the reach of children.
RECHARGING
CAUTION: to recharge the clipper, only use the adaptor supplied.
If the adaptor gets lost or damaged, contact an authorized service center and do not use any other adaptor
which may damage the internal battery and jeopardize the functionality of the device. When you first use the
product fully charge it, leaving it connected to the charger for at least 10 hours.
Plug the power adaptor (11) to the power outlet and the connection pin (12) into the socket on the rear of
product (6). During charging operation, the LED (5) is red. When battery is fully charged, it becomes green.
The following measures will preserve the battery life.
Before first use, charge the battery by leaving the hair clipper connected to the adapter for about 10 hours.
Before you recharged, completely discharged the battery.
When the unit is not in use for a long period (2 months), it is recommended to let it charge for about 10 hours
before using. In any case it is advisable to fully discharged the battery before recharging.
If the appliance, even after a recharge, works only if it is connected to the adapter, it is possible that the
battery is no longer capable of delivering enough power to the unit. In this case, please contact an authorized
service center.
INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES
Attention: the removal and disposal operation is reserved exclusively for specialized technical
personnel!
Toremove the battery:
