12
ekey finger scanner
Installation instructions
B-55600-13-4-6
03.2014 | 16083EE | Printed in Germany
EN
3.3 Milling dimensions
Make a milled recess to match the dimensions below in
your door profile or in the timber door.
* recommended milling dimensions (may vary
according to material). Tolerance
±
0.2 mm
3.4 Fastening versions for finger scanner
3.4.1 Fastening for timber door leaf
Remove the three screws along with the
snap-in noses.
Finally, snap the decorative element for
outdoor use into place, including the
gasket.
Please use the screws provided to fasten the scanner to the timber.
