G-Tek MIP-100 User Manual Download Page 54

Page: 54 / 64

48 --- Connecting to the PC

The upload status is shown on the screen. Wait till the

screen shows

Initializing

before using the phone.

CAUTION: Do not remove the battery, turn off the device, or

operate the device while the firmware upgrade is in process.

Using WIM

The WIM application is a useful interface that lets you

set up and configure the MIP-100 from your PC or PDA.

You can personalize Wi-Fi profiles according to your net-

work specifications. You can also use the application to

download ringtones, configure SOS numbers for the

phone, and make any setup changes for the phone.

Double-click the WIM icon to start the application from

your PC or PDA.

The following screen is displayed when you open the

WIM Desktop application.

Please wait for a few seconds while the device is being

searched. You can start using the application once the

device is found.

Summary of Contents for MIP-100

































































Search results

Summary of Contents for MIP-100

Reviews:

Related manuals for MIP-100

Brands by name

Popular brands

G-Tek MIP-100, User Manual

Search results

Summary of Contents for MIP-100

Reviews:

Related manuals for MIP-100

Brands by name

Popular brands