G-Tek Corporation Private Limited
31
7.3.4
Store Interval
Store interval is the parameter which is used to store the reading data from sensor to the memory of
LmNet after a fixed interval time while batch is running. Store interval can set in seconds and minutes
combination on LmNet device by following the below mentioned procedure with pressing the
appropriate buttons given on the front panel of the LmNet.
7.3.5
Alarm On time
Alarm On time is user settable parameter in seconds and minutes, which will allow the sensors to
settle in terms output readings. For example, if output to be expected to stable in 10 minutes and 50
seconds than device will generate continuous alarm condition after this time.
To set the Relay on time, follow the procedure shown in figure- 32 by pressing the appropriate buttons
given in the front panel of the LmNet.
Figure 31 Store Interval
Figure 32 Relay ON time
Str Int
SECond
mInUte
1 128.55
0 to 59
0 to 240
SAvE
SAvE
ALrm on
SECond
mInUte
1 128.55
0 to 59
0 to 240
SAvE
SAvE
