background image

mini from your computer. 

Mac OS X Computers 

1. Before powering down and disconnecting 
G-RAID mini, you must unmount the system 
by simply dragging the G-RAID mini icon to 
the trash located in the dock. 
 
2. It is now safe to power off and remove G-
RAID mini from your system. 

Optimizing Performance 

G-RAID mini can be connected to any Mac or PC that has an 
eSATA, FW800 or USB 2.0 ports. FW400 can be accessed by a 9 
to 6 pin cable.

For best performance, G-RAID mini should be connected via 
eSATA.  
 

Technical Support

G-Technology appreciates and values its customers, striving 
to give you the finest service and support. If you encounter 
any difficulties while installing the G-RAID mini, or if the G-
RAID mini needs maintenance, please contact G-Technology 
Technical Support via one of the following ways: 
 
Telephone: (310) 449-4599 
Fax: (310) 449-4670 
E-mail: [email protected] 
Internet: http://www.g-technology.com 
 
When contacting Technical Support, make sure to be in front 

of your computer and have the following information readily 
available:

• Your G-RAID mini serial number (on bottom of unit) 
• Operating system and version 
• Computer brand and model 
• Amount of memory installed 
• Other devices attached to your computer 
 
Thank you for purchasing G-RAID mini. If you have any 
comments or questions about this manual or the product, 
please call (310) 449-4599, or send an email to  
[email protected] 

 

Limited Warranty

Hitachi Global Storage Technologies (“Hitachi GST”) 
including G-Technology by Hitachi
Limited Warranty for External Hard Disk Drives

What does this limited warranty cover?

This Limited Warranty applies to new Hitachi GST external 
storage products purchased from an authorized Hitachi GST 
dealer by the original purchase for normal use and not for 
resale. Hitachi GST warrants that a covered product is free 
from defects in materials and workmanship, with the 
exceptions stated below.

How long does limited warranty coverage last?

This limited warranty lasts for 1 year, 2 years, 3 years or 5 
years, or a fixed period from date of purchase, depending on 
when and where it was originally purchased. To determine 
the warranty specifically for your product, visit

13

Summary of Contents for Mini
















Reviews: