Page 7
G-SAFE Product Guide
7.2 FRONT PANEL STATUS LED & ALARM
During normal operation, the front panel STATUS LED will
glow green. If a failure occurs, the STATUS LED will change
to yellow and the alarm will sound. The alarm can be
muted by pressing the mute button located on the front
panel of G-SAFE
STATUS LED
Alarm
System Status
Green OFF
OK
Yellow ON
Disk or fan failure, over
temperature warning
7.3 LCD Panel Messages
During normal operation, the LCD panel will display the
following message.
If one the disk drive modules is removed or the system
does not recognize a drive module on power up, the
following message will appear on the LCD. Power off G-
SAFE and ensure that the drive modules are completely
inserted in to the G-SAFE enclosure.
If a drive failure occurs, the LCD will indicate which disk
must be replaced as shown below. (See Section 7 –
REPLACING A DISK DRIVE MODULE)
If the fan malfunctions, the LCD will display the message
below. Stop using G-SAFE until the fan module is replaced
If the system is overheating, the LCD will display the
message below. Stop using G-SAFE and move the unit to a
cooler environment.
Note: If any of the above error messages appear, contact G-Tech
Technical Support at (310) 449-4599 or
for
assistance. It is critical that action be taken to ensure reliable operation
and data integrity.
Summary of Contents for G-SAFE
Page 2: ...Page 2 G SAFE Product Guide ...
