G-RAID
3
Product Guide
Page 6
7. INITIALIZING G-RAID
3
G-RAID
3
is set up at the factory for
use with Mac OS X systems. If you
are running Mac OS X, G-RAID
3
will
mount on the desktop right out of the
box.
If it becomes necessary to re-format G-RAID
3
, follow the
instructions below.
•
For Mac OS X installations, proceed to Section 7.1
•
For Windows 2000/XP installations, proceed to Section 7.2
•
For Cross-Platform use see section 7.3
7.1
Mac OS X
1. Open the Apple
Disk Utility.
The Apple
Disk Utility
is in
the
Utilities Folder
located in the
Applications Folder
on
the Macintosh HD. Select G-RAID
3
by clicking on the entry in
the left-hand column as shown below. Information about
G-RAID
3
will be displayed at the bottom.
3. Select the Partition tab to view the partition options as
shown below.
4. Set the
Volume Scheme:
to
1 Partition
.
Enter a
Volume Name
under Volume Information
(in this example “G-RAID3”) and set
Format
to
Mac OS Extended
as shown below.
Note
: Alternatively, G-RAID
3
can be set up in multiple volumes by
selecting the desired number of partitions from the Volume
Scheme pull-down menu.
2
Summary of Contents for G-RAID3
Page 2: ...G RAID3 Product Guide Page 2...
