G-Technology 909112-01 Installation Manual Download Page 13

 
 

  

Page 13 

G-DRIVE mini Product Guide  

9.  OPTIMIZING DATA TRANSFER RATES 
 

G-DRIVE mini Triple 
G-DRIVE mini Triple can be connected to any Mac or PC 

equipped with a FireWire 400, FireWire 800 or USB2.0 port. 
For best performance, G-DRIVE mini Triple should be 

connected via FireWire 800.  

 

G-DRIVE mini Combo 

G-DRIVE mini Combo can be connected to any Mac or PC 
equipped with a FireWire 400 or USB port.  For best 
performance, G-DRIVE mini Combo should be connected via 

FireWire 400. 

 

 

10. TECHNICAL SUPPORT 

If you encounter any difficulties while installing G-DRIVE 

mini, please contact G-Tech Technical Support via one of the 
following ways: 

 

Telephone: (310) 449-4599 
Fax: (310) 449-4670 

E-mail: [email protected] 
Internet: 

http://www.g-technology.com

 

 

When contacting Technical Support, make sure to be in front 

of your computer and have the following information readily 
available: 

 

 

Your G-DRIVE mini serial number (on bottom of unit) 

 

Operating system and version 

 

Computer brand and model 

 

Amount of memory installed 

 

Other devices attached to your computer 
 

Thank you for purchasing G-DRIVE mini. If you have any 
comments or questions about this manual or the product, 

please call (310) 449-4599, or send an email to 

 

[email protected]

 

 
 

 

11. LIMITED WARRANTY 

G-Technology Inc. (G-Tech) warrants your product against any 

defect in material and workmanship, under normal use, for 
the designated warranty period.  If the product should 

become defective within the warranty period, G-Tech, will at 
its discretion, repair or replace the product.  Repair or 

replacement parts or products will be furnished on an 
exchange basis and will be either new or reconditioned.  All 

replaced parts or products shall become the property of G-
Tech. This warranty shall not apply if the product has been 
damaged by accident, misuse, abuse or as a result of 

unauthorized service or parts. Warranty service is available to 
the purchaser by obtaining a Return Material Authorization 

number (RMA) and by delivering the product during the 
warranty period to an authorized G-Tech service facility or to 

G-Tech. The purchaser shall bear all shipping, packing and 
insurance costs and all other costs, excluding parts and labor, 

necessary to effectuate repair, replacement or refund under 
this warranty. All returned product must be shipped to  
G-Tech in the original shipping container. 

 

For more information on how to obtain warranty service, an 

RMA number or to acquire shipping materials, contact G-Tech 
at 1629 Stanford Street, Santa Monica, CA 90404, (310) 449-

4599 or 

[email protected]

 

IN THE EVENT A PRODUCT BECOMES DEFECTIVE DURING 
THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE 
REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED 

ABOVE. INCIDENTAL OR CONSEQUENTAL DAMAGES, 
INCLUDING WITHOUT LIMITATION LOSS OF DATA, ARISING 

FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ARE 
NOT THE RESPONSIBILITY OF G-TECH AND, TO THE EXTENT 

PERMITTED BY LAW, ARE HEREBY EXCLUDED BOTH FOR 
PROPERTY DAMAGE, AND TO THE EXTENT NOT 

UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE.

 

Summary of Contents for 909112-01














Reviews: