G Sat TR-150, User Manual

Page: 22 / 38

TR-150 page 22
6.2 Tracking/Monitoring TR-150 by SMS
User sends following tracking commands to TR-150 to control the device. After
TR-150 receives the command, TR-150 will perform the specific report mode. There
are five report functions:
Immediate report , Period report , Stop (Standby), Geofence and Voice
monitor .
SMS Commands for controlling TR-150
Report type Format
Return
message
0 Immediate report
? 0 ,IMEI,Report_Format,Return_Phone_Number! $0,IMEI,OK!
1 Period report
? 1 ,IMEI,Report_Interval,Number_of_Reports,
Report_Format,Return_Phone_Number!
?1,IMEI,OK!
2 Stop
? 2 ,IMEI,Return_Phone_Number!
?2,IMEI,OK!
4 Geofence
? 4 ,IMEI,{[R,longitude,latitude,longitude,latitude],
[C,longitude,latitude,radius(meter)]},In_or_Out,
Report_Interval,Number_of_Reports,Report_Format,
Return_Phone_Number!
?4,IMEI,OK!
6 Voice monitor
? 6 ,IMEI,Return_Phone_Number!
Note: If return phone number is empty, TR will call back to Caller ID
?6,IMEI,OK!
Note :
1. Data Report Format:
Report_Format = 0
Æ Format0
Report_Format = 1
Æ Format1
Please refer to description in this chapter later.
2. Return Phone Number:
Return_Phone_Number
TR will send data report and return message back to this return phone number.
If return phone number is empty, TR will send report back to default SMS return phone number.
If default SMS return phone number is empty neither, TR will send report back to caller ID.
3. Number of Report:
Number_of_Reports = 0
Æ
continuous report
Number_of_Reports = X
Æ X times report
4. Report Interval:
Report_Interval
Set Report Interval in seconds.