TR-150
page
18
5.4 TR-150 Setup
1.)
Connect the USB cable to TR-150 and the USB port on your PC.
2.)
Set DIP Switch 3 to “On” position.
3.)
Turn on the power of TR-150. The status LED will light on red indicating it has
already entered the setup mode.
4.)
Start Call Center program.
5.)
Click
Device
>
TR150 Setup
to select the COM port. If you are not sure about
which COM port to use, please click “Scan COM Port” button to automatically
scan it. Then click “Setup” button to enter setup window.
