The auto dialler can be programmed to send you a telephone call after each text alarm
has been sent.
You will receive approximately three ring tones. The unit will then hang up automatically.
This is to prevent call charges being incurred.
To set call alerts to ON please send the text message
The unit will reply back “call on”
To disarm call alerts please send the text message.
If the call function has been set to
you will receive a text message and shortly after a
phone call.
Page 5
You can now change the alarm message for inputs 1 & 2 to your own choosing.
To change the message send the text command as follows.
#
MESS1
=
YOUR MESSAGE
#
(Input 1 Detected)
Input 1
#
MESS2
=
YOUR MESSAGE
#
(Alarm triggered)
Input 2
This will change the message to
“YOUR MESSAGE”
Default message
