GNW3324A GAS PRESSURE WASHER
30
2)
Cover the pressure washer and store it in a clean, well ventilated and dry
place. Ensure storage area is at room temperature.
3)
In addition, in order to prevent external parts rust, please daub anti-rust
oil to bolts and nuts of machine at least every one year.
10.5
PUMP ANTIFREEZE
If your pressure washer is subjected to freezing temperatures, damage
could occur. This type of damage is not covered
under warranty. To avoid possible damage, a small
amount of antifreeze can be used.
1)
Place the unit on its side with the water inlet
facing upwards, pour 1/4 cup of antifreeze into
the water inlet.
2)
Disconnect spark plug wire, and then pull recoil starter several times to
circulate the antifreeze in the pump system. Reconnect spark plug wire.
3)
It is also important to make sure the wand and all hoses are
disconnected and drained of all water or they may burst.
When taking pressure washer out of storage, run water through the
system until it runs clear.
