GNW2820A GAS PRESSURE WASHER
25
➢
Shut down the pressure washer
Step #1
：
Turn the engine switch into “OFF” position to shut down the
engine.
Step #2
：
Turn the fuel valve into “OFF” position to cut off the fuel..
Step #3
：
Squeeze the trigger of spray gun, release the pressure inside
the pump.
Step #4
：
Cut off the water supply.
Step #5
：
Squeeze the trigger again to drain the rest water of system.
Step #6
：
Disconnect the pressure hose and spray gun.
Step #7
：
Put the gun and hose on the hook.
All done!
WARNING!
Some cleaning jobs can be completed by using only water, but for
most, it is advantageous to use a detergent to penetrate and remove
the dirt more effectively. When using pressure washer approved
detergent, make sure the surface to clean is dry. Wetting the surface
first is not recommended; it will dilute the detergent and will reduce the
cleaning effectiveness.
Avoid hot surfaces or direct sunlight; this will minimize the chances of
the detergent damaging the painted surface.
DO NOT let the detergent dry or it may damage the painted surface.
Allow the detergent to remain on the surface for a short time before
rinsing with clean water under high pressure.
WARNING!
This pressure washer is intended for use with pressure washer
detergents only.
Do not use powdered soaps which will clog the injection system.
Follow the detergent manufacturer’s directions.
