GNW2820A GAS PRESSURE WASHER
22
Step #1
：
Turn the engine switch into “ON” position.
Step #2
：
Locate choke lever to “CLOSE” position.
Step #3
：
Turn the fuel valve into “ON” position.
Step #4
：
Put the throttle lever to the “FAST” position.
Step #5
：
Locate recoil cord and pull slowly until resistance is felt. At this
point, pull rapidly to start engine.
Step #6
：
After engine starting, locate choke lever to “OPEN” position.
TIPS
：
If unable to start the engine, please repeat the above operation one
or two times.
Step #1
Step #3
Step #4
Step #2
Step #5
Step #6
