The oven is equipped with four handles on the top so it can be loaded and unloaded.
Whenever loading or unloading always use hydraulic beams or hoists to prevent accidents
and damages to the equipment.
We recommend extra care in inspecting the equipment in order to identify any damages
that may have been caused during its transportation, such as:
With the help of a crowbar, remove battens that involve the packaging.
- Broken or dented parts.
- Parts missing.
Any damages that might have been caused during transportation should be communicated
to the transporting company and to the manufacturer.
After removing equipment from the package, perform visual inspection in order to check
for any possible damages caused during transportation.
UNPACKING
TECHNICAL FEATURES / DIMENSIONS
TRANSPORT
RECEIVING
GAS TURBO OVEN
FTG 300-240-150-120
Model
FTG 120
FTG 150
FTG 240
FTG 300
Monophase Source
110 = 4A / 220 = 2A
110 = 4A / 220 = 2A
110 = 9A / 220 = 5A
110 = 9A / 220 = 5A
Net Weight
(Kg)
170
170
265
280
Gross Weight
(Kg)
210
210
355
380
Model
FTG 120
FTG 150
FTG 240
FTG 300
10 min
10 min
12 min
15 min
0,5
0,5
1,0
1,0
3
1,27 m
3
1,27 m
3
1,52 m
3
1,90 m
1,0 Kg
1,0 Kg
1,2 Kg
1,5 Kg
5 Kpa
5 Kpa
5 Kpa
5 Kpa
Working
Pressure
PG/ h
Consumption
NG /h
Consumption
KW / h
Consumption
Heating
Time
Model
FTG 120
FTG 150
FTG 240
FTG 300
15 to 18
15 to 18
15 to 18
15 to 18
300 x 360
375 x 450
600 x 720
750 x 900
4
5
8
10
58 x 70
58 x 70
58 x 70
58 x 70
300
240
150
120
Amount of 50-g
Rolls of Bread.
Dimensions of the
Baking Pans
Amount o
Baking Pans
Production of
50-g rolls / h
Cooking Time
( min )
Door
Opening:
Should
the
door
remain
open for more than 3 minutes, a message saying
“DOOR”
will
be
displayed
and
a
sound
signal
will
go
off. As
soon
as
the door is closed,
automatic ignition of the flame will take place.
Time and Temperature:
To program the temperature, press switch key for approximately
3 seconds; indicator display should start flashing indicating that the temperature can be
programmed by pressing switch keys and . After you have set the temperature program,
press switch key again, and time indicator will start flashing. That indicates time can be set
by pressing switch keys and . After that, press switch key again, and the equipment
will be back to regular control condition.
NOTE:
During programming, if there is a pause longer than 3 seconds, equipment will resume
regular control condition.
Steam Time:
To adjust steam time, turn oven on pressingkey , and display on the top will
show VAP while display on the bottom will show the amount to be programmed. Adjust amount
with keys and . Programmed value will be saved after 3 seconds without pressing the keys.
Turbine:
Turbine will activate itself 3 seconds after
Emergency Switch key
and
ON / OFF
Switch key
have been pressed.
* Following sequence described above, burner flame wil l light up and go out automatically ,
always keeping temperature that was programmed.
To set a new configuration, proceed as follows:
GAS TURBO OVEN
FTG 300-240-150-120
1- First check whether ga s valves on the cylinder are open, and if the oven is plugged
into the electrical wall socket.
2- Set gas valve to
“On”.
3- Turn emergency switch key and press
“On/Off” .
4- At this moment, controller will proceed automatic ignition of the burner, and display
will exhibit the configurations set at the factory.
Steam:
It can be activated by pressing switch key . Steam will be activated for time
programmed with 10-second intervals between activations.
6
Lamp:
Can be activated by pressing switch key ; once it has been activated light will only
turn off after 8 seconds.
1
Flame:
The presence of flame will be indicated by a LED flashing on one side of the display
on the top. If, during cooking, flame goes off, the equipment will stop working and display
message “FLAME OUT”, and a sound signa l will go off. To light up the flame again, press
switch key for 3 seconds; then ignition process will start again.
4
4
6
3
4
3
3
5
5
4
5
End of Cooking:
As
soon
as
cooking
process
is
over, the equipment will sound an alarm
and
time
displays
will
start
flashing. To turn it off, press switch key
. Note: Oven doesn't
turn
off
by
itself. To turn
the equipment off after cooking time is over it is necessary to press
On /Off switch key.
2
Automatic Igniting:
When
equipment
is
turned
on, it
ignites
automatically,
with
three
attempts to light up the flame. Should flame not be detected at the end of the igniting cycle,
display will show “FLAME OUT” . To try lighting up the flame again, press switch key
for
3 seconds
.
4
FUNCTIONING:
SEQUENCE TO TURN OVEN ON:
24
17
