12
and high tones. The FREQ switch enables changing of the TREBLE knob frequencies
range. Switching to the L position move the TREBLE knob frequencies range to the
lower frequencies. It enables to get the tone of the effect similar to the typical tape and
analog delays. Additionally, the SMOOTH
switch set to H (HIGH) position enables to
enlarge the effect of high and low frequencies
attenuation for successive repeats. It causes
that the delays are heard as from apparently
bigger distance.
Below are shown settings of the SD-1 which
enable to obtain that effect.
Effect switching off
Switching off mode is defined by position of the OFF MODE switch. In HARD mode
the switching off is immediate with muting of repeats. In SOFT switching off mode the
repeats of previously played tones will resound to the end.
CTRL OUT output
CTRL OUT output enables to control the DUAL REVERB (G LAB DR-3/2, DR) via
MIDI commands or by using ON/OFF switch of the SD-1. In that purpose it is needed to
