G-Lab GSC-4, User Manual

Page: 18 / 34

user manual GSC_4 17
– Field with gray color back round (“3”) with the information “LOOPS SPLIT” in the lower part of
the display indicates that loops are split (see chapter 4.2.5).
Figure 3.2.5 SWITCH section
SWITCH section fields are subject to the following mechanisms:
– The field’s color back round depends on the last used MFS footswitch.
– Field with color back round (“B”, “4”) indicates that the given switch is ON.
– Empty field (“2”, “3”, “5”, “6”) indicates that the given switch is OFF.
Figure 3.2.6 MIDI section
MIDI section fields are subject to the following mechanisms:
– Empty with red color back round (“1”, “4”) indicates that the defined MIDI device is without a
defined midi action.
– Field with red or yellow color back round (“2”, “3”) indicates that the defined MIDI device is
with a defined midi action.
– Empty field with gray color (“5”, “6”, “7”, “8”, “9”, “10”) indicates that there is no defined MIDI
device.
3.3 Recalling the preset
Press the MFS footswitch (from 0 to 9) to recall the preset. Controller will recall all preset settings with
the hardware response (Bank and preset will be active).
Alternatively it is possible to recall the preset by pressing UP/DOWN footswitches.
Press UP to switch to one preset up and then press DOWN to switch to one preset down.
Depending on the BANK/PRESET CHANGE MODE setting the GSC-4 responds as follows:
DIRECT (default) – controller will recall all preset settings with the hardware response.
INDIRECT (browsing mode) – Bank and MFS name, number and MFS mode will be displayed in positive
(see figures 3.2.1, 3.2.2, 3.2.3). Screen will display all preset settings with no hardware response. Press
any MFS footswitch to recall all preset settings with the hardware response.
For changing DIRECT and INDIRECT change MODE follow the instruction below:
MENU -> BANK/PRESET CHANGE MODE.