G-Lab Dual Vintage Overdrive, User Manual

Page: 3 / 16

1
Version 1.2
Dear Customer!
Thank you for choosing our product.
Dual Vintage Overdrive (G LAB DVO) is the overdrive type stomp box
effect with two overdriven channels (independent setting of gain, overdrive type
and volume), SOLO volume boosting function and CLEAN tone. DVO can work
as a stomp box connected between a guitar and an amp or as the pre-amp –
connected between a guitar and the power amp.
Basic characteristics:
- classical guitar tube pre-amp emulated by selected FET transistors,
- passive equalizer: TREBLE, MIDDLE, BASS with typical tube amp
characteristics,
- two overdriven channels (CH 1, CH 2) with gain control (GAIN),
boosting and characteristics settable by BOOST A and BOOST B
switches, volume control (VOLUME), enabling to perform from almost
clean tone, through crunch one up to full overdrive,
- SOLO function with adju3 dB or +5 dB boost,
- four working modes of footswitches (set by DIP switches),
- clean tone with volume control (CLEAN),
- independent guitar electronic tuner output (TUNER) with MUTE
function,
- PRE OUT output with buffered direct signal from a guitar,
- FOOT PEDAL input for controlling by the G LAB GSC controller or by
a footswitch,
- possibility working in the parallel mode with amp channels and
overdriven channels (CH 1 or CH 2 of DVO), connected directly to a
power amp (skipping pre-amp),
- TREBLE and BASS boost switches post overdriving,
- backlighted footswitches,
- 9V DC power supply.