8
Silent tuning function (MUTE)
Electronic tuner should be connected to the TUNER output. To MUTE
press at the same time left and central footswitches. All indicators will start to
blink. To exit MUTE function should be pressed any footswitch again. The
guitar signal is active all the time at TUNER output.
Connection to the Guitar System Controller G LAB GSC
DVO can be controlled by a typical latching type output two-switch foot
pedal connected to the FOOT PEDAL input.
Connecting the FOOT PEDAL input and SW1&2 (or SW3&4) output of
the GSC controller by a Jack/Jack stereo cable enables to control DVO
functions according to the below table.
Mode
Switch
Indicator is not lit
Indicator is lit
SW1 (or SW3)
CH 1
CH 2
1 i 2
SW2 (or SW4)
Lowered volume
Full volume
SW1 (or SW3)
CLEAN tone
CH 1 or CH 2
3
SW2 (or SW4)
CH 1
CH 2
SW1 (or SW3)
BYPASS
CH 1 or CH 2
4
SW2 (or SW4)
CH 1
CH 2
Summary of Contents for Dual Vintage Overdrive
