36
10.5. ADVANCED: USING THE NETWORK SETUP WEBPAGE
(AEROSPHÈRE SMALL & LARGE)
What is needed for this setup?
You need a computer (Mac, Windows or Linux), a tablet or a smartphone that is connected to your home network.
You also need to know the password of your Wi-Fi network. This method works with any Wi-Fi router or Wi-Fi
access point.
Figure 35: How to do the Wi-Fi setup with the network setup webpage.
Instructions
iPhone, iPad or iPhone touch with iOS 7 or higher:
This setup method will
not
work with iOS version 7 or higher.
Instead, use the WAC Wi-Fi Setup method in the Setup Guide.
1.
Turn the AeroSphère Speaker on
: wait until you see the display flash two times repeatedly in green. When you
are using the AeroSphère Speaker for the first time, this mode is already enabled. Skip step 2 - 4 and go to step 5.
2. After you turned the speaker on, wait about 30 seconds.
3. If the display does
not
flash two times repeatedly in green, you can enable this Wi-Fi Setup manually:
Hold the “SETUP” button on the back for 10 seconds
, until the display starts flashing two times repeatedly in
green.
4. Wait 30 seconds.
5. A new temporary Wi-Fi network is now available (“AeroSphere_Small_SETUP…” or
“AeroSphere_Large_SETUP…”). This temporary Wi-Fi network is created by the AeroSphère speaker and does
not require a password.
