FEATURES AND OPERATIONS
Note 4 : Night Timer Mode
This mode is practical when a very cold night is forecasted. The engine will start every 3 hours for a period of 3 minutes (4 times maximum). To
activate this mode, the following steps must be performed :
1. The engine should not be running and the system should not be in valet mode.
2. Press 2 times (quickly) on the start button . The parking lights will flash 4 times to confirm the entry to this mode.
This mode is deactivated if the vehicle is started by the key or the remote.
Note 5 : Enable / Disable The Shock Sensor
Disabling the shock sensor could be useful when the sensor is defect or you’re in an area with a lot of vibration. This mode allows you to disable
the shock sensor to avoid the alarm to trigger for nothing. To enable or disable this mode, the following steps must be performed :
1. Disarm the system by pressing on the unlock button .
2. Turn the ignition key to ON position (engine is not running).
3. If
disabled
, press 2 times (quickly) on the auxiliary button
to
enable
this option
(confirmation 1 bip / 1 flash)
.
If
enabled
, press 2 times (quickly) again on the auxiliary button to
disable
this option
(confirmation 2 flashes).
4
AUX
AUX
