G.I.T POWERStart P8U-FM Owner'S Manual Download

Page: 2 / 10

TRANSMITTER OPERATIONS

Arm & Lock the Doors

Disarm & Unlock the Doors

Enable / Disable audible

Start / Stop the Engine

Description

Button

Function

AUX

Audible enable :

confirmation 1 chirp / 1 or 3 flashes (dome light delay).

Audible disable :

confirmation 1 or 3 flashes (dome light delay).

Audible enable :

confirmation 2 chirps / 2 flashes.

Audible disable :

confirmation 2 flashes.

Start and stop the remote starter.

Enable or disable the audible function.

See note 1.

Enable :

confirmation 1 chirp / 1 flash.

Disable :

confirmation 2 flashes.

Panic Mode

Temporary Valet Mode

Enable / Disable
The Shock Sensor

Night Timer Mode

AUX

Activation of panique mode.

See note 2.

Note : the engine should not be running.

The system temporary ignore the passive arming mode.

See note 3.

The engine will start every 3 hours.

See note 4.

Enable or disable the shock sensor.

See note 5.

Enable :

confirmation 1 chirp / 1 flash.

Disable :

confirmation 2 flashes.

AUX

Auxiliary 1

Auxiliary 2

Trunk Opener

Auxiliary 3

AUX

Confirmation 1 or 6 flashes depending the programmation of the installer.

Confirmation 1 or 5 flashes depending the programmation of the installer.

Confirmation 1 or 4 flashes depending the programmation of the installer.

Allows to release the trunk.
Confirmation 1 or 3 flashes depending the programmation of the installer.

2 sec

Summary of Contents for POWERStart P8U-FM











Search results

Summary of Contents for POWERStart P8U-FM

Reviews:

Related manuals for POWERStart P8U-FM

Brands by name

Popular brands

G.I.T POWERStart P8U-FM, Owner'S Manual

Search results

Summary of Contents for POWERStart P8U-FM

Reviews:

Related manuals for POWERStart P8U-FM

Brands by name

Popular brands