Eighth
．
the range of numerical values:
Program settings:
parameter
initial value
Setting range
Display range
time(min:sec)
30:00
5:00-99:00
0:00
－
99:59
gradient
（
segment
）
0
0-15
0-15
speed
（
KM/H
）
1.0
1.0-20
1.0-20
distance(kM)
5.0
0.5-99.0
0.00
－
99.9
Heart rate(times/min)
N/A
N/A
50-200
calorie(KCAl)
100
10-990
0
－
999
S
ecurity lock function:
In any situation, pulling off the safety lock can stop the treadmill from running urgently. When the treadmill is
in an emergency stop, the bee sounder screams and the window displays
“
safe
”
; at this time, the treadmill
cannot perform any other operations except shutdown.
After the full lock is re-installed correctly, the treadmill re-enters the standby state and waits for an input
command.
Shutdown:
The treadmill can be turned off at any time by turning off the power switch so that it does not damage the
treadmill.
Machine debugging process:
1. Before powering on, please confirm whether the power supply voltage is normal, confirm whether the
grounding wire is well grounded, whether the running belt is flexible by hand, whether there is abnormal noise,
and whether the resistance is abnormal.
2. Turn on the power, turn on the red power switch on the front of the machine, enter the standby state after the
electronic watch is fully displayed for three seconds, press the
“
START/STOP
”
button, the treadmill starts
running, and the running speed is 1km/h. Please observe the running at this time. Whether the various parts of
the machine are working properly.
3. Press all the buttons on the electronic watch to see if each button corresponds to its marked function, and
whether the button is valid and feels good.
4. Press the safety switch to see if the electronic watch screen displays the emergency stop action (SAFE)
prompt character. Whether the running treadmill will stop.
5. Shake the handrail of the machine by hand to confirm if the machine is stable.
6. Check the tightness of the running belt of the machine during commissioning. For details, please check the
attachment
“
Daily Maintenance of Treadmill
”
.
Daily maintenance:
The electric treadmill adopts special imported running belt, which is made of special production technology
of cotton composite material. It has the advantages of small friction
coefficient, high tensile strength and low
noise. The running board adopts a unique double damping system. The top layer of urea-formaldehyde resin
has high surface finish and super wear resistance, making the movement more comfortable and smooth!
1. When the machine has a lot of dirt or the lubricant is reduced, the friction coefficient of the running board
