“
REST
”
return key
：
Press this key can return standby Interface
；
3
．
“
START/STOP”: If the power is switched on and safe lock is ok,the treadmilll can be started or stopped
by pressing this key at anytime
4.
“
SPEED+
”
and
“
SPEED-
”
are speed addition and subtraction keys: standby state, used to adjust the set
value. It is used to adjust the speed after starting, and its adjustment range is 0.1 km/time.
5, "INCLINE
↑
", "INCLINE
↓
" is the slope plus or minus button: standby state, used to adjust the set value.
It is used to adjust the slope after starting, and the adjustment range is 1 segment/time.
6, "1, 2, ... 9, 0, Delete, ok" for speed, slope shortcuts.
Third, quick start (manual mode):
1. Turn on the power switch and properly attach the magnetic safety lock to the safety lock position below the
panel.
2. Press
“
START
”
to start the stop button, the system will enters the 3 second countdown, the buzzer sounds,
and the
“
Central dot matrix display area window
”
window displays the countdown number. After the 3
seconds countdown, the treadmill will be at 1 km/h. start operation.
3. After starting, use the
“
SPEED+
”
and
“
SPEED -
”
keys to adjust the speed of the treadmill. Use the
“
INCLINE
↑”
and
“
INCLINE
↓”
keys to adjust the gradient of the treadmill.
Fourth, the operation during the movement:
1. Press the deceleration button to decrease the running speed of the treadmill.
2. Press the accelerator button to increase the running speed of the treadmill.
3. Press the slope button to decrease the slope of the treadmill.
4. Press the slope button to increase the slope of the treadmill.
7. Press the stop button to slow down the running opportunity until it stops running.
8. When the athlete holds the heartbeat handle with both hands, the heartbeat data is displayed for about 5
seconds.
Fifth, manual mode:
In the standby mode, press the
“
START/STOP
”
button directly, the treadmill starts running at 1.0 km/h
speed and slope 0; other windows start counting from 0, press
“
INCLINE
↑”
,
“
INCLINE
↓”
,
“
The
SPEED+
”
,
“
SPEED -
”
keys change the slope and speed.
After using
“
SPEED+
”
and
“
SPEED-
”
to modify the speed, use the numeric keypad to set the
corresponding speed shortcut; after using
“
INCLINE
↑”
and
“
INCLINE
↓”
to modify the slope, use the
numeric keypad to set the corresponding gradient shortcut. . The Delete button is the undo button and Ok is
the confirmation button.
Sixth, built-in automatic program:
In the standby state, press the
“
PROGRAM
”
button to enter the editable countdown mode. The
“
TIME
”
window displays
“
30:00
”
and flashes. Press the
“
SPEED+
”
and
“
SPEED -
”
buttons to set the exercise
time. The range is from 5:00 to 99:00.
The system has 8 built-in automatic programs, and displays the corresponding program map in the
“
Central
Dot Matrix Display Area
”
. At the same time, the
“
TIME
”
window flashes; the preset time is 30:00, press
“
SPEED+
”
,
“
SPEED -
”
to set the required exercise time, then press
“
START/STOP
”
to start the built-in
program. The built-in program is divided into 10 Segment, each movement time = set time/10. When entering
the next paragraph, if the speed or slope will change, the system will give a
“
Bi-Bi- Bi-
”
3 sound prompt, the
speed and slope of the system will change with the block change, during which you can press
“
INCLINE
↓”
,
“
The INCLINE
↑
", "SPEED+", and "SPEED -" keys change the speed and slope, but when the program
enters the next segment, it will return to the speed and slope of the segment. After running a program, the
