G-FITNESS TZ-3000, Manual

Page: 9 / 18

Assembly step three:
Assembling the console; connecting the magnetic line
1) Connecting the magnetic line of the console with the line in the holder console
holder.
2) After connected the magnetic line, place the console at the joint of console holder
and fasten it (as shown), using 4pcs of (13) and 4pcs of (14).
3) Stepping on the running belt run it, and press the button to start the
treadmill, check the machine is running normally or not, the console data display is
comprehensive and accurate or not.
4) If the machine runs normally, all bolts are tightened in place, then, the treadmill is
assembled;
Magnetic wire connecting
( one wire only)