15
TC 40
Original Instructions - rev.1 - 2016 - in compliance with 1.7.4 Machine Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 – 25046 Cazzago San Martino (Bs) – Italia – Tel. + 39 030 7451154 – Fax. + 39 030 73 56 629
Select the bevelling tool according to the bevel required and slide it into the chuck. Lock it in position
with the two grub screws and the 2mm Allen key.
N.B.:When the tool is mounted , the tool profile must face outwards, and it is advisable to use two
paired tools
