24
GRINDER G400
Original Instructions Rev.01
-
2017 in compliance with the § 1.7.4 of the Machines Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 –
25046
Cazzago San Martino (Bs) –
Italia –
Tel. + 39 030 7451154 –
email: [email protected]
Now select the desired working mode :
1)
Semi
-
Auto Mode (The machine controls only the push):
Before starting,
select the ampere absorption value by acting on the potentiometer specific
to the attachment that is being used.
The absorption value range is different for the attachments:
Disc : 6
-
15
Grinding tape : 5
-
7
For the first approach it is highly recommended to set the lowest value of the scale in
order not to gouge beyond the root weld as this would compromise the entire work-
piece. It is thefore recommended to assess any necessary increase during the opera-
tions.
Keep pressed the head feeding button indicated in the picture until the grinding disc touch-
es the workpiece.
Hold the button pressed until the head reaches the maximum workload previously set on the
potentiometer and its value stabilizes.
1
Ampere Absorption
