G.B.C G400 Instruction Manual Download Page 27

Page: 27 / 27

GRINDER G400

Original Instructions Rev.01

2017 in compliance with the § 1.7.4 of the Machines Directive 2006/42/CE

G.B.C. Industrial Tools S.p.A.

Via Sandro Pertini 41/43 –

25046

Cazzago San Martino (Bs) –

Italia –

Tel. + 39 030 7451154 –

email: [email protected]

N.B. UNPLUG THE UNIT FROM THE ELECTRIC POWER BEFORE PERFOR-

MING ANY OPERATION

N.B. Every 200 working hours:

grease

the spindle by inserting the tip of the

greaser in the grease inlet located on the outer side of the part.

Follow the steps below to carry out this operation safely:

(1) Remove the gringing disc protection, (2) Remove the gringing disc, (3) Grease

the part.

Pic.1

N.B. Every 300 working hours:

perform a thorough check of the toothed belt.

Follow the steps below to carry out this operation safely:

(1) Remove the screws that hold the protection in place, (2) Remove the protec-

tion, (3) Check the toothed belt.

FIG.2

Do not interpret the pictures!

The Sales and Technical team of G.B.C. is at your disposal for any clarification you

may need.

PIC.1

PIC.2

Summary of Contents for G400




























Search results

Summary of Contents for G400

Reviews:

Related manuals for G400

Brands by name

Popular brands

G.B.C G400, Instruction Manual

Search results

Summary of Contents for G400

Reviews:

Related manuals for G400

Brands by name

Popular brands