FYTTER |WWW.FYTTER.COM
PAG- 43
PROBLEM
POSSIBLE CAUSES
CORRECTION
Treadmill will
not start
1.
Not plugged in.
2.
Safety key not attached
correctly.
3.
Treadmill circuit breaker
tripped.
4.
On/Off switch not turned on.
5.
Auto shut down timed out.
1.
Tighten into suitable outlet.
2.
Insert safety pull pin.
3.
Reset circuit breaker.
4.
Turn on On/Off switch.
5.
Unplug and re-plug electrical cord.
Treadmill belt
slipping
1.
Walking belt too loose.
2.
Deck needs lubrication.
1.
Tighten walking belt.
2.
Lubrication belt and deck.
Treadmill noisy
1.
Loose hardware.
2.
Motor straining.
3.
Clicking sound-roller knocking.
1.
Tighten visible screws, nuts and bolts.
2.
Check the belt tension-3 finger test.
3.
Adjust rear rollers-check the tension.
Inaccurate pulse
rate
1.
Too much hand movement.
2.
Palms too wet.
3.
Gripping handgrips too tight.
4.
Wearing rings.
1.
Stand on the side rails to obtain accurate
pulse reading.
2.
Dry palms.
3.
Grip using moderate pressure.
4.
Remove all rings.
Summary of Contents for RU04RX
