FYTTER BLUMIUM trainer TR-05B, Manual, Page: 34 / 41

FYTTER | WWW.FYTTER.COM PAG- 33
26 Rail End Cap
(LH)
1 63 Screw M8*60 1
27 Tube Cap 1 64 Wheel 2
28 Rail end cap
(RH)
1 65 Chain cover (LH) 1
29 Spindle ,foot
rest
∮
13*113 2 66 Motor Cable 1
30 Motor 1 67 Square Cover 1
31 Console lower
cable
1 68 Self-tapping
Screw
∮
4*15 2
32 Console middle
cable
1 69 Adjust Foot Pad M10 1
33 Cross Screw M5*8 4 70 Speed sensor 2
34 Self-tapping
screw
∮
5*15 9 71 Cable 1
35 Wheel Cover 1 72 Adaptor 1
36 Stopper 1 73 Cross Screw M3*20 2
37 Spindle 4 74 Sensor 1
38 Bushing 2 75 Sensor cable 1
76 Flat
washer(black)
∮
6.5*
∮
13*T1.5 4
8. PERIODIC MAINTENANCE / MANTENIMIENTO PERIÓDICO / ENTRETIENS PÉRIODIQUES /
MANUTENZIONE PERIODICA / REGELMÄßIGE WARTUNG / PERIODIEK ONDERHOUD /
MANUTENÇÃO PERIÓDICA
(ENGLISH) REGULAR MAINTENANCE:

STORAGE: Keep your equipment in a enclosed place, away from dust or humidity. Don’t store it neither in a garage or in
a indoor backyard, or near the water.

Humidity, dust and water could damage it and have an effect on its functioning.

POWER CORD: Make sure that the cable and plug are in perfect conditions. Electric cables must be away from hot
surfaces.

SCREWS AND CONNECTING CABLES: Supervise and tighten the screws on a regular basis, because due to the vibration
the screws and nuts tend to loosen.

CLEANING:: Don't use abrasive products. A damp cloth is enough.

LEVELING: Please use the leveling wheels in case your unit has ones in order to avoid vibrations and therefore a
malcfuction.

LUBRICATION: The mobile parts of the machine some screws, chain transmission...) must be properly lubricated. This
lubrication must be done on a regular basis and according to its use, even before the first use.

KEEP THESE MAINTENANCE ADVISES FOR FUTURE REFERENCES.