-28-
the clock time manually. During the manual setup, several other
functions may be set.
Press and hold the “
MODE/SET
” button for 3 seconds until
the time zone starts flashing. Use the “
▲
” and “
▼
” buttons to
set the values. Press the “
MODE/SET
” button to confirm each
step.
You may set the following functions.
12/24 hours
RCC on/off
time zone
day display language
hours
minutes
seconds
year
month
day
temperature
alarm signal length
RCC on/off:
To switch the DCF-77 receiver on or off.
seconds:
When setting the second, it’ll turn to 0.
temperature:
To set the temperature display to °C or °F. Se-
lect the desired display.
When the thermometer value falls outside of the measurement
range, the display will show: LL.L (below the minimum tem-
perature) or HH.H (above the maximum temperature)
alarm signal length:
To set the maximum duration of the
alarm signal when the wake-up time is reached (1 or 2 min-
utes).
day display language:
To set the desired language in which
the days must be displayed.
