-
12
-
(6) Dashboard
5.1
"Start" button
In standby /countdown mode, press the button to start the treadmill. The default speed is
0.5MPH. In preset mode, press the button, the treadmill will start and act according to the
preset value and accumulate the data.
5.2
"Stop" button
In the running state, press this button to stop the exercise and return to the standby
mode. Press the stop button for more than 2 seconds, the system restarts.
5.3
"Up/Down" button
It is used to adjust the speed after start up, and the adjustment range is (0.1 MPH) / time.
Keep pressing for more than 0.5 seconds, it will continuously increase or decrease.
It also can be used to adjust the setting value in the setting state.
5.4
"Program" button
To select 12 preset automatic programs P01 ~ P12.
5.5
"Mode"button
To switch between various modes in standby mode. Including time countdown (setting
range 5: 00 ~ 99: 00), distance countdown (setting range 1 mile ~ 99 miles), calorie
countdown (setting range 20 ~ 990). After the treadmill is started, every window will
display cyclically at an interval of 5 seconds. You can press the "M" button to switch
between cyclic display mode and single display mode.
5.6 "SAFE KEY" Area
In case of emergency, pull out the safety key to cut power instantly.
