DCAM BusComp Rack Extension
6
© 2012 FXpansion Audio
Makeup
The
Makeup
control increases the output gain after the compressor circuit has applied gain reduction to
the input signal.
Master section
In Gain
The
In Gain
control adjusts the level of the input signal, from -inf dB to +18 dB.
Out Gain
The
Out Gain
control adjusts the level of the final output signal, from -inf dB to +6 dB.
Mix
The
Mix
control allows you to blend the final output mix between the input signal (0%) and output signal
(100%).
This is useful for quickly introducing parallel dynamics processing without having to perform extra
routing in your DAW/host, allowing you to achieve a compressed sound while also keeping the
transients of the original signal intact.
Gain Reduction
This meter represents the amount of gain reduction currently being
applied to the input signal.
Saturation
Activating the
Saturation
button enables the BusComp's saturation
circuit. The saturation behaviour is dependent on the level of the
input signal. Note that this function is not a peak clipper - the signal
can still exceed 0dB depending on the input level and
compression settings.
.
Input and Ouptut metering
In
This meter represents the level of the audio input to be processed.
Out
This meter represents the level of the output audio signal.
