DCAM BusComp Rack Extension
4
© 2012 FXpansion Audio
2
Using DCAM BusComp
Rear panel audio connections
DCAM BusComp features a set of various inputs and outputs on its rear panel.
The
Audio Inputs
connectors should be used for the input signal (to be processed) while the
Audio
Outputs
should be connected to a suitable destination.
If you need to use DCAM BusComp on a mono signal, use the Left input and output channels.
If the
Sidechain
input is connected, the audio source feeding it is used to drive DCAM BusComp's peak
detection circuit instead of the main signal, meaning that you can affect the input signal's dynamics with
the characteristics of another signal entirely.
The
GR Output CV
connector outputs the peak detection envelope as a CV source to automate CV-
controllable parameters elsewhere in your Reason project.
Note that the absence of any audio signal causes DCAM BusComp to stop processing, except when
the
Sidechain
and
GR Output CV
are connected - in this case DCAM BusComp can be used purely as a
device to generate an envelope CV source from the
Sidechain
input.
