FXA FXAJD5083, Instruction Manual

Page: 174 / 244

10
WORKPIECE CLAMPING
To prevent the drill bit from spinning the work piece if
the drill bit becomes jammed in the hole being drilled,
it is recommended that a drill vice or other suitable
clamp is used to secure the work piece during the
drilling operation.
If the bit jams in the workpiece or if the drill stalls,
stop the tool immediately. Remove the bit from the
workpiece and determine the reason for jamming.
Note: This drill has an electric brake. When the switch
trigger is released, the chuck stops turning. When the
brake is functioning properly, sparks will be visible
through the vent slots on the housing. This is normal
and is the action of the brake.
MAINTENANCE
This power tool normally requires no maintenance;
from time to time the ventilation slots on the motor
casing should be cleaned out. If the unit should
become defective, repair should be performed by an
authorized service agent for electric tools.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
Warning! Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result
in serious personal injury.
TEChNICAL SPECIFICATION
ChARGER
Voltage 18V DC
Capacity 2.0Ah
Charge time 60 minutes
Cell type Lithium-ion
No load speed 0-440min -1 (low)
No load speed 0-1650min -1 (high)
Torque settings 21+1
Maximum torque 40Nm
Keyless chuck size 13mm
Drilling capacity (wood) 25mm
Drilling capacity (steel) 10mm
Sound Pressure Level L
pA
71 dB(A)
K=3dB(A)
Sound Power Level L
WA
82 dB(A)
K=3dB(A)
Vibration Level 3.0 m/s 2 , K=1.5m/s 2
ENVIRONMENTAL PROTECTION
Information for (private householders) for the environmentally responsible disposal of Waste Electrical and
Electronic Equipment (WEEE)
This symbol on products and or accompanying documents indicates that used and end of life
electrical and electronic equipment should not be disposed of in household waste. For the
proper disposal, treatment, recovery and recycling, please take these products to designated
collection points, where they will be accepted on a free of charge basis. Alternatively, in some
countries you may be able to return your products to your retailer upon the purchase of an
equivalent new product. Disposing of this product correctly will help to save valuable resources
and prevent any potential adverse effects on human health and the environment which could
otherwise arise from inappropriate waste disposal and handling. Please contact your local
authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect
disposal of this waste in accordance with national legislation.
FOR BUSINESS USERS IN ThE EUROPEAN UNION.
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union.
This Symbol is only valid in the European Union.
If you wish to dispose of this product, please contact your local authorities or dealer and ask for the correct
method of disposal.
Voltage 230V~50Hz
Output voltage 18V DC 2.4A