13
Before you start the machine, check the condition of
the log splitter. Keep protective equipment in its place
and in good condition. Make it your habit to check that
all work tools have been removed from the work area
before starting the machine. Change damaged, missing
or and delivered partners before using the machine.
Start the machine without a load and check that it is in
working order.
Keep in mind of possible hazards does situations that
can develop with the splitting of certain types of logs
(e.g. logs that are bumpy or have irregular forms).
Remember to always use a Portable Residual Current
Device (PRCD) if the electric system does not have a
fault current switch of at least 0.03 A.
Never split logs that are larger than the log size
specified in the manual. Never attempt to split logs that
contain parts such as nails or steel wire that are
hazardous to the operation of the machine.
The log's lower surface should be cut evenly and there
should be no branches in the log. The log should be
split in the direction of the wood grain. Never place the
log in a vertical position on the log splitter.
The user must always operate the control device with
both hands. The control device must not be used in
any other way.
Place the machine on a horizontal and stable
supporting surface. Ensure that there is plenty of room
to move around the machine. Ensure that there are no
objects on the supporting surface that could prevent
the free movement of machine. For this purpose, we
recommend the use of a log splitter stand. Never use
the machine on the ground. Attach the log splitter to a
work base if it moves from its place.
Danger! Never split two logs at the same time.
Danger! Never add the next log or change a log while
the machine is in operation.
Danger! Never tamper with the log splitter's protective
equipment and do not use the machine without
protective equipment.
Warning! Never force the log splitter for longer than five
seconds when you attempt to split particularly hard
wood. When this time period has expired, the oil can
overheat. Change the position of a particularly hard log
by 90° to see if it can be split in the other direction. If
you are unable to split the log, this means that the
wood hardness exceeds the machine's capability.
Forbidden! Never open the switch box or the cover of
the electric motor. Contact a qualified electrician if
necessary.
Warning! Take care that the machine and the electrical
cable remain far from water. Handle the electrical cable
with care.
Never jerk or tear the electrical cable. Keep the
electrical cable far from high temperatures, of oil and
sharp objects.
wHATS IN THE BOX (FIG.1 & 1A)
UNPACKING & ASSEMBLY
WARNING! The tool should never be connected to a
power supply when you are assembling parts, making
adjustments, cleaning, performing maintenance, or
when the tool is not in use. Disconnecting the tool will
prevent accidental starting that could cause serious
injury.
1.
Log splitter
2.
Wheel x 2
3.
Wheel shaft
4.
Horizontal shaft with 2 inner hexagon bolts
(M6 x 35) and washers x 2
5.
Horizontal leg with 2 bolts
6.
Front leg x 2
7.
Back leg x 2
8.
Handle
9.
Wheel cover x 2
10. Inner hexagon bolt (M8 x 45) x 4, washers x 8,
nut x 4
11. Circlip x 4
12. Cover A
13. Top cover
14. Log catcher
15. Wood supporting bracket x 2
16. Cover B
17. Side cover
18. Outside hex bolts (M6x12) 6pcs
19. Gasket (Ø6) 4pcs
20. Lock nut (M6) 4pcs
21. Outside hex bolts (M8x16) 2pcs
22. Gasket (Ø8) 2pcs
23. Lock nut (M8) 2pcs
24. Gasket (Ø5) 13pcs
25. Spring washer (Ø5) 13pcs
26. Outside hex bolt (M5x10) 13pcs
27. Knob 2pcs
28. Gasket (Ø6) 2pcs
Summary of Contents for FXA502018666
