FXA 501741206, Instruction Manual

Page: 17 / 62

- 17 -
3. Take engine to an authorized our
servicing dealer, or refer to shop
manual Fuel filter clogged, carburetor
malfunction, ignition
malfunction, valves stuck, etc.
Replace or repair faulty
components as necessary
4. Push the prime button In cold condition Push the primer button
ENGINE LACKS POWER Possible Cause Correction
1.Check air cleaner Air cleaner elements clogged
Clean or replace air cleaner
elements
2. Check fuel
Bad fuel; engine stored without
treating or draining gasoline, of
refueled with bad gasoline Drain the fuel tank and
carburetor. Refuel with fresh
gasoline
3. Take engine to an authorized our
servicing dealer, or refer to shop
manual Fuel filter clogged, carburetor
malfunction, ignition
malfunction, valves stuck, etc.
Replace or repair faulty
components as necessary
7. Storage
z
The same petrol must not remain in the tank for more than one month.
z
Thoroughly clean the mower and store it indoors in a dry place.
z
Never store the lawnmower with fuel in the tank inside a building where can reach an open flame or
spark.
z To reduce fire hazard, keep the engine, muffler, battery compartment and fuel storage area free of
grass, leaves or excessive grease.
z
If the fuel tank has to be drained, this should be done outdoors.
z
Be careful during adjustment of the machine to prevent entrapment of the fingers between moving
blade and fixed parts of the machine.
z Allow the product to cool for at least 30 minutes before storing.
8. ENVIRONMENT
Should your machine need replacement after extended use, do not put it in the domestic waste but
dispose of it in an environmentally safe way.