Wire it up - Power Boost 18V
The Board GND connections don’t all have to directly attach to the board. You can
run a couple of wires from the DC connector, one to the board, another to the IN
jack, then daisy chain that over to the OUT jack.
It doesn’t matter how they all connect, as long as they do.
This circuit is standard, Negative GND. Your power supply should be Tip Negative /
Sleeve Positive. That’s the same as your standard pedals (Boss etc), and you can
safely daisy-chain your supply to this pedal. Now... GO GET BOOSTED!
PedalParts.co.uk
L
E
D
BOARD
OUT
BOARD
9V
BOARD
GND
BOARD
GND
BOARD
GND
BOARD
INPUT
+
IN
OUT
L
E
D
BOARD
GND
BOARD
LED+
+
+
**If you’re only going to power it with an 18V
adapter just omit the battery snaps altogether
