background image

CAPTIVA, old Civic, old CR-V, etc.

The pack of PKE-100 supplies OBD port connection or single wire

connection according to specific car.

Can high

Can high wire, normally works together with Can low wire (twisted

wire).

The pack of PKE-100 supplies OBD port connection or single wire

connection according to specific car.

Can low

Can low wire, normally works together with Can high wire (twisted

wire).

The pack of PKE-100 supplies OBD port connection or single wire

connection according to specific car.

Can GND/GND

Directly connect with metal ground.

Window-up 1

Negative output.

The output timer, sequence and other parameters are according to

specific cars, only 12v electric method installation has regular DIP

permutation to adjust them, see Chapters DIP Settings.

Trunk

Negative output.

Unlock

Negative output.

Window-up 2

Negative output.

The output timer, sequence and other parameters are according to

specific cars, only 12v electric method installation has regular DIP

permutation to adjust them, see Later chapters.

Window-up 3

Negative output.

The output timer, sequence and other parameters are according to

specific cars, only 12v electric method installation has regular DIP

permutation to adjust them, see Later chapters.

Steering lamp 2

Positive output; directly supply power to original steering lamp.

Maximum output current 7.5A.

Push Button Cable

ACC /Blue

For ACC signal background LED

ON /Orange

For ON signal background LED

Brake /Green

For Brake signal background LED

Press input -1

For press action signal input -1

Press input -2

For press action signal input -2

Assisted Cable

Door Lamp +

Positive input, normally do not connect it (see Door Trigger).

Door Lamp -

Negative input, normally do not connect it (see Door Trigger).

Fuel circuit

Positive input. For fuel detective and start output policy purpose.

For diesel vehicle with 12v electric installation method, this wire does

not exist or difficult to find, just give up it and change to connect ON

wire. After that, you can not start vehicle from ON status, must turn to

OFF then start again

Start Cable

IG1

To car original IG1 (ON1), black.

Normally does not break off when starting.

12V-1

To car original 12V-1 (B1), green.

IG2

To car original IG2 (ON2), blue.

Normally breaks off when starting.

11

Summary of Contents for PKE-100 (V3)

















Reviews: