Translation of original operating instructions for petrol chainsaw FX-KSP series
38
Fuel-oil mixture
A mixture of 2-stroke petrol and oil with anti-
rusting agent for 2-stroke engines is used as
fuel for the air-cooled 2-stroke petrol engine.
Recommended mixing ratio of fuel to
oil 40:1.
Make sure that the petrol has a minimum
octane rating of 95 RON.
Table mixing ratio 1:40
Medium
Unit
Volume
Petrol
l
1
2
3
2-stroke oil ml
25
50
75
Medium
Unit
Volume
Petrol
l
4
5
2-stroke oil ml
100
125
The recommended oil for a long service
life of the 2-stroke engine is FUXTEC 2-stroke
oil "Made in Germany" (available directly from
the manufacturer).
Replenishing fuel-oil mixture
CAUTION!
Danger of explosion!
The fuel-oil mixture develops volatile, highly
inflammable gases.
Ensure when replenishing the fuel-oil mixture
that no fuel spills and that there are no
sources of ignition nearby.
Pour the fuel-oil mixture in the tank with care.
Wipe away leaks immediately with a clean
cloth.
Replenishing FUXTEC chain saw oil
CAUTION!
Never use old oil or reconditioned engine oil.
Using oils of this kind can cause malfunctions
in the oil pump.
CAUTION!
Danger of ignition!
Ensure that no oil is spilled when filling the
chain saw oil.
Therefore, exercise caution when pouring the
oil into the oil tank. Wipe away leaks immedi-
ately with a clean cloth.
For trouble-free operation and a long service
life of the chain, the use of FUXTEC chain
saw oil "Made in Germany" is recommended.