Original User Manual FUXTEC FX-GS36
4
1.
Intended use
The spreader is to be used exclusively for spreading granules.
If your spreader does not distribute the granules evenly, make sure that the
front of the gearbox points to the front of the spreader. The impeller must
turn clockwise. Reversing the gear will cause the impeller to rotate
counterclockwise. Clean the paddlewheel after each use, residues on the
bucket wheel cause uneven distribution.
Your spreader is designed to give the best spreading results when pushed at
5 km/h (fast walking). Slower or faster speeds will change your spreading
pattern. Moist grit or granulate changes the flow velocity and the spreader's
spreading pattern. Clean your spreader thoroughly after each use. Gears are
already lubricated at the factory
2.
Preparation and security
•
Wear face protection or safety goggles during use
Wear appropriate clothing. Only wear closed shoes with non-slip soles.
Use of the granulate spreader with sandals or barefoot is prohibited
•
Wear close-fitting clothing. Avoid too loose clothing
•
Wear non-slip gloves during use
If necessary, wear a dust mask, starting from the material to be scattered
•
Long hair should be bound back
•
Apply directional markings before using the granulate spreader
•
Use only in daylight or good artificial light
•
Read and follow all instructions of the chemical manufacturer
ATTENTION
During work, the line of sight must be directed to the surface to be
processed; do not be distracted
•
Ensure a secure stand and direction of movement. Caution on unpaved
or slippery surfaces
•
Attention: Chemicals or materials that are hazardous to the environment
should be avoided
Follow all guidelines of the chemical manufacturer
