Original User Manual FUXTEC FX-FSR152_de_fr_rev05
11
4.
Notes for accessories
●
Make sure that your product is only equipped with original accessories. Only use
original parts that are specified by the manufacturer. The use of any other
accessories or attachments may cause injury to the user and damage to the device
●
Clean the device thoroughly, mostly the fuel tank and air filter. After using the
device, remove all fuel
●
If you, as a bystander, approach a user of the device, carefully attract his attention
and confirm that the user will stop the engine. Please do not startle or distract the
user; otherwise, you could cause an unsafe situation
●
Never touch the nylon cutting head when the device is running. If it is necessary to
replace the guard or cutting tool, be sure that the device and cutting tools have
stopped
●
The device must be OFF before you change the working range of the device
●
If necessary, have the device repaired by an authorized dealer. If the device is
defective, do not let it continue to run
●
When starting or operating the device, never touch hot parts such as the exhaust,
the ignition cables or the spark plug
●
After the device is stopped, the exhaust is still hot. Never place the device near
inflammable materials (dry grass, inflammable gases or inflammable liquids, etc.)
●
Pay particular attention to the fact that the ground can be slippery when operating in
the rain or immediately after the rain
●
If you glide or fall to the ground, release the throttle immediately
●
Before removing the blockage, stop the device and remove the spark plug connector.
Before adjusting or repairing the device, make sure that the engine is stopped, and
the spark plug connector is removed.
●
Make sure that you do not hit the device against obstacles
●
If the device is to be stored for a more extended period, drain fuel from the fuel tank
and carburettor, clean the parts, place the device in a safe place and make sure that
the device has cooled down completely
●
Carry out constant checks to ensure safe and efficient operation of the device. For a
complete inspection, please contact a specialist workshop
●
Keep the device away from fire or sparks
●
Be careful when using it. There are dangers due to kickback and recoil
