FUXTEC FX-AF2212, Manual

Page: 63 / 136

Original-Bedienungsanleitung FUXTEC FX-AF2212_de_en_fr_ita_rev01
63
•
The throttle must be in a choke position for a
cold start.
Engine runs erratically or stops
during operation.
•
Clean or replace the air cleaner.
The engine is difficult to start.
•
Drain old fuel and replace it with fresh. Use a
fuel stabilizer at the end of the season.
•
Make sure the spark plug wire is firmly
connected to the spark plug.
•
To start the engine, the driving safety levers
must be moved to the
idle position.
Lack of or insufficient engine
power.
•
Raise the shallow tillage chopping blades by
lowering the depth control lever.
•
Remove and clean the fuel tank.
•
Clean or replace the air cleaner.
•
Improper carburettor adjustment - contact an
authorized engine repair shop.
•
Replace the spark plug and adjust the gap.
•
Drain and refill the fuel tank and carburettor.
The engine does not stop when
the throttle is in the stop
position.
•
Refer to the engine operator's manual to
check and adjust the throttle.
Tiller moves forward when
started.
•
To start the engine, move the travel safety
levers to the idle position.
Tiller is challenging to control
when milling (device jumps or
stalls forward).
•
Lock the wheels in the milling position.
•
Raise the hoeing blades for shallower tillage
by lowering the depth control lever.
Hoeing knives turn, but wheels
do not turn.
•
Lock the wheels in the milling position.
•
Internal transmission failure contact your
dealer.
Chopping knives and wheels
turn, but the tiller does not
move.
•
Lower the chopping blades for a deeper tillage
depth by raising the depth control lever.
Problem Solution/ Troubleshooting
The engine does not start
•
Add gasoline to the fuel tank.
•
Connect the spark plug wire to the spark
plug.